Welcome to SIMUWU

  • NO.1299, Xinjiniqao Road
    Pudong New District Shanghai China
  • Opening Time
    Mon - Sat: 09.00 to 18.00
  • Mail Us
    contact@vacfurnace.com

High-temperature vacuum sintering furnace - FCT Systeme GmbH »

High-temperature Vacuum Sintering Furnaces. These furnaces are equipped with electrical resistance heating or with inductive heating. They can be used for numerous purposes because they apply vacuum as well as inert atmospheres. This main application is debinding and subsequent sintering of ceramics or powder

High-temperature gas pressure sintering furnace - FCT Systeme

The special feature of the GPS process is a sequence of dewaxing at low pressure, sintering at normal pressure and -after a status is reached with only closed pores being present in the material - sintering at a high pressure, which results in a further densification and faster elimination of the remaining pores. Therefore

vacuum sintering furnace | SIMUWU

Our vacuum sintering furnace,sintering is the process of compacting and forming a solid mass of material by heat and/or pressure without melting it to the point. into dense material in the condition of the vacuum.People use this process to produce ceramics, powder metallurgy, refractories, ultra-high temperature materials.

Materials Research Furnaces, Inc.: MRF

Materials Research Furnaces manufactures and services high-temperature, vacuum and controlled atmosphere furnaces for a wide range of applications.

Sintering Furnace with High Temperature-Vacuum Processing

Standard Furnace Features. The VFS vacuum debinding and sintering furnace is packed with features for fast and effective applications. These include: Choice of graphite or all-metal hot zone; High Sintering Temperature of up to 3000°F (1648°C); Vacuum levels to 10-6 Torr (8x10-5 mbar); Partial pressure with argon,

Vacuum Sintering Furnace for Powder Metallurgy, MIM, 3D Print

In the Ipsen vacuum process, parts are first heated to the binding agent's vaporization temperature. The temperature is held at this level until all outgassing of the binding agent is complete. Debinding segment control is provided through the application of a suitable partial gas pressure (usually using argon, hydrogen or

Sintering - ALD Vacuum Technologies

Overpressure Sintering (HIP) Following the vacuum sintering process, 6 to 10 MPa Argon gas is introduced into the furnace at sintering temperature to further reduce porosity and to ensure the material quality of high-performance hard metal tools and other sintered parts. Applications of Sintering Furnaces Dewaxing

HHV Sintering furnace

Physical Specifications. Hot zone size : 200 (W) mm X 200(H) mm x 250 (D) mm. Temperature : 1850 degree C. Pressure : 1.1 bar (A). Ultimate vacuum : 10 -3 m.bar. Hot zone material : Graphite Heater with Graphite Board Insulation. Charge weight : 50-60 Kgs. Process : Sintering

High Temperature Vacuum Sintering Furnace - RDWebb

High temperature vacuum/inert gas atmosphere furnace designed specifically for university, industrial, and government research laboratories.

High-temperature vacuum sintering furnace - FCT Systeme GmbH »

High-temperature Vacuum Sintering Furnaces. These furnaces are equipped with electrical resistance heating or with inductive heating. They can be used for numerous purposes because they apply vacuum as well as inert atmospheres. This main application is debinding and subsequent sintering of ceramics or powder

High-temperature gas pressure sintering furnace - FCT Systeme

The special feature of the GPS process is a sequence of dewaxing at low pressure, sintering at normal pressure and -after a status is reached with only closed pores being present in the material - sintering at a high pressure, which results in a further densification and faster elimination of the remaining pores. Therefore

vacuum sintering furnace | SIMUWU

Our vacuum sintering furnace,sintering is the process of compacting and forming a solid mass of material by heat and/or pressure without melting it to the point. into dense material in the condition of the vacuum.People use this process to produce ceramics, powder metallurgy, refractories, ultra-high temperature materials.

Materials Research Furnaces, Inc.: MRF

Materials Research Furnaces manufactures and services high-temperature, vacuum and controlled atmosphere furnaces for a wide range of applications.

Sintering Furnace with High Temperature-Vacuum Processing

Standard Furnace Features. The VFS vacuum debinding and sintering furnace is packed with features for fast and effective applications. These include: Choice of graphite or all-metal hot zone; High Sintering Temperature of up to 3000°F (1648°C); Vacuum levels to 10-6 Torr (8x10-5 mbar); Partial pressure with argon,

Vacuum Sintering Furnace for Powder Metallurgy, MIM, 3D Print

In the Ipsen vacuum process, parts are first heated to the binding agent's vaporization temperature. The temperature is held at this level until all outgassing of the binding agent is complete. Debinding segment control is provided through the application of a suitable partial gas pressure (usually using argon, hydrogen or

Sintering - ALD Vacuum Technologies

Overpressure Sintering (HIP) Following the vacuum sintering process, 6 to 10 MPa Argon gas is introduced into the furnace at sintering temperature to further reduce porosity and to ensure the material quality of high-performance hard metal tools and other sintered parts. Applications of Sintering Furnaces Dewaxing

HHV Sintering furnace

Physical Specifications. Hot zone size : 200 (W) mm X 200(H) mm x 250 (D) mm. Temperature : 1850 degree C. Pressure : 1.1 bar (A). Ultimate vacuum : 10 -3 m.bar. Hot zone material : Graphite Heater with Graphite Board Insulation. Charge weight : 50-60 Kgs. Process : Sintering

High Temperature Vacuum Sintering Furnace - RDWebb

High temperature vacuum/inert gas atmosphere furnace designed specifically for university, industrial, and government research laboratories.